Tech Forte process consists of an initial application of a densifier which enhances the life of the marble, instead of only coating the top of the marble which requires repeated applications over a number of years. This original technology sets our product apart in terms of strength, abrasion resistance and extended gloss life from other densification processed materials available in the market today.
In the densification process, the formula densifier is soaked into the marble which begins a chemical reaction which internally fills the pores of the marble. This reaction solidifies the marble. The result of a technology makes the marble surface less porous, absorption resistant from dust of marble salts and significantly enhanced an abrasion resistance for heavy duty use.
What we have achieved at the end of the process is a product far superior, premium and durable.
Slab moving in machine through Robot
Net fiber fixing in machine
Fiber slab out through Robot
Keep slab in 48 to 50 hours so that its wet surface should be cured.
Arranging of slabs in Techforte tank frame
Dipping of frame with slabs in Techforte Tank
Keep slab inside the tank for 24 to 30 hours, as per nature of material.
Withdrawal of dipped slab from the Techforte Tank
Keep slab in normal temperature for 48 to 50 hours, so that wet surface should be cured.
Top Surface Filling in Machine
Slab out through Robot
Keep slabs in normal temperature for 24 hours.
Polishing meter check
Strength can be occurred in the slabs only after 30-40 days in natural cure, as per nature of material.
Applying of sealer and shiner
© 2023 CMC | All Rights Reserved
